HS4421YK1AY8M00, Evotron Heavy Duty Encoder, Incremental 12-Axis 1024 Pulse

Here's a recent customer inquiry about a product thatAvtron EncodersModel: HS4421YK1AY8M00 This is a 12mm shaft 1024 pulse encoder. Because it isAvtron Encoders, we all know that the delivery time is a big problem. Now with the tariffs, it's probably even harder.

The customer was going to do a customization for replacement. The number of customers is also not large, only 5 requirements, just very anxious. We can only match according to the original product parameters to find a suitable solution to help him solve this problem.

Let's take a look at some parameters of the original encoder. According to the official website, the encoder parameters are as follows: incremental encoder, shaft diameter 12mm, pulses 1024, and the official manual says "Seamless replacement for Baumer HOG8, HOG9, Lehner-Linde 861, 862, 865 and other competing models". That's a good solution, we have a 1:1 replacement for the Lerner Linde. Just use it directly.

Introduction to Customized Alternatives

This is an encoder with a 12mm blind bore shaft, which we replaced with 1:1 parameters. This is actually a common product we use, especially in wind power. I'll post the dimensional drawing first.

This whole customized replacement exterior dimensional drawings, and the internal mechanics we also have a complete solution that can be mated with Lerner Linde. Then it is easy to replace this Evotron HS44. With these parameters, we can realize the perfect replacement.

Looking at it this way, there aren't too many parameters to communicate. This HS44 is a seamless replacement for Baumer's HOG8, HOG9, and Lehner Linde 861, 862, and so on. By the way, there's also a Meier encoder that looks exactly the same in terms of size and parameters. These products are interchangeable, just that some customers do not know it.

Delivery and Process

The customization of such products is no special process, as long as the parameters are confirmed, there is no problem. For example, today's model HS4421YK1AY8M00 encoder, the front of the parameters are well established on it. Behind the "8M00" may be a special parameter is not known, it may be required 8 meters long cable. This and customer communication can be.

For lead times, as a frequently made encoder model is usually handled quickly. It's just that order scheduling is a bit tight right now. It might take around 7-10 business days, give or take.

There's nothing else that needs to be said about it, except that thisAvtron EncodersIt's just not common. There are actually quite a few branded models that can replace him. Need help are welcome to contact, the end of the article at the bottom of the phone microblogging.