About CEV65M-02711 model matter received an inquiry from a metallurgical company. This customer's equipment is a bit old and is said to have been in operation for a short time.
The client's message was clear that he wanted a solution.Encoder ReplacementThe program, on the one hand, they have cost pressure, and on the other hand, this product is not so easy to purchase. They have two suppliers, but the prices given are very high.
Let's take a look at this product parameter.
This encoder is an SSI communication protocol product with a resolution of 4096*4096.Seeing this, this encoder seems unusual. The real difference is the size of the flange, which is a 106mm flange. This flange size is still relatively rare, fortunately a similar flange has been developed before.
This alternative is clear:
A flange is machined to the original dimensions to form a set of hardware with the 58mm aluminum housing. Of course a 12mm solid shaft is indispensable. Then the internal electrical and mechanical parts we have a mature program, which can be completed by a little technical processing.
In this way, an alternative solution is completed.
The main solution for this alternative is the mounting dimensions, i.e. the flange is the focus. The electrical part we have a complete solution for. This combination completes the alternative solution.
Doesn't it seem not too complicated?
It's actually that we've been doing it so long that some of the routine substitutions don't seem difficult anymore. It's sort of an occupational hazard, we're only interested in the hard parts. So the notes we write may sometimes be incomprehensible to people. But that's not a problem, as long as it solves the actual substitution problem.
Feel free to call if you need to.
原文链接：https://www.bmq123.com/en/211.html
