This is an encoder for a metallurgical customer's rolling mill application, a Pepperl+Fuchs absolute encoder that isSSI Encoders. Customer feedback says that the official website has been poor to this product, to commission a custom encoder replacement. According to this product will not disappear, the specific is not clear. Anyway, the replacement for this product is a breeze.
ENA58IL-R12DA5-1213SG1-RC5, this encoder is an SSI communication signal encoder, the interface is Gray code, resolution 1213. the size of the shaft hole of this encoder is 12mm, which is considered to be relatively large in the blind hole shaft. Finally, the connection form, 5 meters of outgoing wire.
That way the parameters are sufficient. We actually have products matching the same parameters, and it's easier to customize, and with a total of 10 encoders, we delivered them in three days.
Introduction to Customized Alternatives
The first thing is that we have a complete electrical solution, it just needs to be done mechanically accordingly through a machining center. It's kind of a regular standard product in our case, so it's not really a difficult thing to do, it's just a standard product.
As the picture above, it is our physical picture. Just need to replace the plug with the outgoing wire. This customer wanted it in a hurry and did not take pictures before shipping.
The original encoder fixing is a round shrapnel, we use a double flying wing bracket, this works better and the mounting dimensions are the same.
There is no more information, because this product is a standard product for us. Maybe it is difficult for customers to purchase this kind of encoder with 5 meters long wire. I do not know what the original brand caused the customer procurement difficulties. I will check the availability of this encoder later when I have a chance.
Generally speaking, we rarely keep a blog diary for regular encoders. Easy to purchase products, we rarely pay attention to, after all, there are too many models of encoders. Can write notes of the encoder are some procurement characteristics.
Now that the client has approached us to do a commissioned customization, it means that there are still barriers to sourcing. Near the end of the time, take a moment to write a diary. This will facilitate the future procurement difficulties of friends.
More than that, this content should be sufficient. Contact me individually if you need it.
Original link: https://www.bmq123.com/en/627.html
