This is aHeavy Duty EncodersFG40SS-1200G-90G-NG-B35/B14 is commonly used in the field of steel metallurgy and other harsh working conditions. We have received a new inquiry about this model number: FG40SS-1200G-90G-NG-B35/B14. The latest information about this model number is dated 2001. This means that this is a very old model, and the official website has long since run out of available information on this product line.
The moment the customer sent me the model number, I thought of a model that I had previously helped a mineral enterprise to customize, which was this product. At that time, the model number of the prototype was FG4SS-1200G-90G-NG, which is almost the same product. Including the B35/B14 after the model number, it is the same parameter.
Let's look at the picture of the original machine sent by the customer:
Non-standard customized solutions
This encoder was easy for us to develop, but there was one more "difficulty", which was the wiring at both ends. Due to the age of the original manual can not be found, wiring definition can not be exactly the same, according to our own wiring definition of the customer's side and can not be wired. Later, the customer courier over the original, we in accordance with the definition of the original wiring to do the wiring. Finally a perfect solution.
Let's take a look at the actual photos of the customized machine:
Above, is an actual picture of our customization.
At that time, the customer demand time is relatively tight, equipment downtime state. So, didn't even have time to do the surface treatment, it was directly sent to the site. The picture on the right is the picture of the surface treatment we did later.
Most of the FG4 series encoders we receive have a shaft diameter of 11mm, but this encoder has a shaft diameter of 14mm, so we need to pay special attention to this point. If the trader has not seen the actual product, it is best to communicate with the customer. After all, it is an old model, there are a lot of uncertainties in the age of the product.
The application of this type of product is currently seen as one that is used more in China, and another that is used more in Russia. Of course, this is only according to our commissioned orders feedback. In any case, this encoder we can help to do non-standard customization. If you need, you can contact the number below.
Finally make a reminder, for non-standard customized products we have no stock, only retain the development program. Therefore, everyone in the order or the initial understanding of the time to plan their own time. Especially in the state of urgent need, we can only do our best to help you. However, there is still a delivery time in between. In addition, it is also recommended to make a good stock of spare parts in advance.
Today thisHöbner EncodersThe non-standard customization of the situation is introduced here.
Original link: https://www.bmq123.com/en/410.html
