This is the model number of the Hoebner encoder, you can see it: FGH6K-2048G-90G-NG-L2-J/50P, the pulse is 2048ppr. This pulse is really uncommon before, usually 2000ppr, or 2500ppr. This time, I came across a new pulse number.
This time the customer was a supplier of spare parts for the steel mill's hot rolling program, not an end customer. This customer came to consult the customized alternative solution, because he could not buy the original encoder. In this case, it is recommended to communicate with the end customer first, do things that can be done, first confirm the acceptance of customization and then detailed communication is better.
The customer gave a very short lead time and estimated that we would have a hard time meeting it. The customer only has 20 days or so left for delivery, plus at least a week for back-and-forth communication and confirmation. This time is very tight, and we can not finish. Now, it is recommended that the customer area communicate with the product and the delivery date.
Customized alternatives
This customized alternative to the encoder was completely developed from the original, which was customized for a steel mill last year. As you know, the first "custom development" takes a long time and there is a lot of uncertainty in the middle. After completing the development, it is relatively easy to do. Just follow the original program from the beginning and do it again.
This FGH6K is a single output through-hole encoder, and with an encoder this large it is usually the main motor position. Here are some more drawings of the replacement encoders we have developed so that you can see the overview of the product at a glance.
The picture above is our appearance drawings, this is the FGH6KK dual output drawings, show more comprehensive. The key point of this encoder is "heavy duty", and there is not much else to explain. The mounting dimensions and application parameters are exactly in accordance with the 1:1 scale of the flat replacement.
We don't have any of these encoders in stock, they are all commissioned and customized on a non-standard basis. Therefore, we pay attention to the delivery date, there is no stock! Last time a customer reflected that you can do some inventory, this is no way to operate, mainly because the overall demand is too small, the second encoder cost is high, and not a profit product, no way to do inventory.
In fact, we still recommend buying the originals. It's actually not cost-effective for us to do off-standard, it's just a value-added service for people to solve application problems. If we do all non-standard, we certainly can't hold on to it. This encoder is so niche that it can only be done in passing. You can't buy the original and then come to us for customization, so that we can also reflect the value.
This encoder is customized one or two at a time and is truly not cost effective . Communication shall prevail in the specific case, there is contact information below the end of the article.
原文链接：https://www.bmq123.com/en/680.html
