I came across a model today that I don't do very often:AMG81P29Z0This is a Profibus protocol absolute encoder. This is a Profibus protocol absolute encoder. When I say it's not done often, I'm actually talking about a replacement for this model. Actually, a lot of substitutions have been made for similar products.
AMG81P29Z0The flange size is 115mm and the solid shaft size is 11mm. does this look familiar? Yes, there are a lot of products out there with this kind of dimensional data. The resolution of this product is 13*16bit, so it's basically the same size as the AMG11P29Z0.
The customer indicated that they were unable to source the original and wanted to configure a replacement. With previous experience, the configuration of this replacement was quite easy.
We have Profibus protocol absolute encoders as standard, in the 58 series and in the 78 series. Just re-produce a 115mm adapted flange, the rest of the base does not need to be changed. This way, it will be a perfect solution.
Yes, this alternative is solved by changing a piece of the adapted flange. Doesn't that sound simple enough? In fact, it is, and it's not a complicated challenge for us.
This encoder replacement was made and production delivery was completed very quickly. Although the number of inquiries for this encoder was small, I felt the need to write a record and publish it. In case there are other people who need it, it is still possible to provide appropriate help.
If you are familiar with encoders, you can observe some products on the market, many encoder products are interchangeable.
If, you too have this need and it is not getting solved. Then, look me up.
Original link: https://www.bmq123.com/en/234.html
