AVM14N-05MK2A0BN-1212 Pepperl+Fuchs Multiturn Absolute Encoder
Multiturn Absolute Encoders
AVM14
ATEX certification.
Explosion-proof housing. Galvanically isolated RS 422 interface
We offer encoder replacement solutions in the form of off-standard replacements with all 1:1 application parameters, perfect replacements for prototype encoders, solving procurement and other problems. The picture shows the replacement solution.
Technical data of the multiturn absolute encoder AVM14
General specifications
| causality | Detailed information |
|---|---|
| Detection type | optical sampling |
| Equipment type | Multiturn Absolute Encoders |
| Operating voltage (U_B) | 10 ... 30 VDC |
| No-load supply current (I_0) | 90 mA max. |
| biometrics | ± 0.5 LSB |
| output code | Gray code, binary code |
| Code route (counting direction) | cw down |
| Interface Type | SSI (Synchronous Serial Interface) |
| single valve time | 20 ± 10 µs |
| decision (of a congress) | Single-Turn: 12-Bit, Multi-Turn: 12-Bit, Integral: 24-Bit: 12-Bit, Integral: 24-Bit |
| transmission rate | 0.05 ... 1.5 MBit/s |
standards-compliant
| causality | (an official) standard |
|---|---|
| Protection level | DIN EN 60529, IP66 |
| Climate testing | DIN EN 60068-2-3, no moisture condensation |
| radiated interference | en 61000-6-4:2007/a1:2011 |
| noise immunity | EN 61000-6-2:2005 |
| impact resistance | DIN EN 60068-2-27, 100 g, 3 ms |
| seismic defenses | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz |
environmental conditions
| causality | gas export area | dust filter |
|---|---|---|
| operating temperature | -40 ... 55 °C | -30 ... 55 °C |
| Storage temperature | -40 ... 70 °C | -30 ... 70 °C |
Mechanical specifications
| causality | Detailed information |
|---|---|
| Material (housing) | Aluminum, Powder Coated |
| Material (flange) | aluminum |
| Shaft material | stainless steels |
| mass (in physics) | Approx. 3400 grams |
| rotation speed | Maximum 6000 min^-1 |
| moment of inertia (mechanics) | 400 g cm^2 |
| Starting torque | ≤ 5 Ncm |
| shaft load | Axial: 60 N, radial 80 N |
Hazardous area data
| causality | Detailed information |
|---|---|
| EU Type Examination Certificate | zelm 02 tex 0078 x |
| marking | 1 II 2G Ex db IIC T6 Gb, 1 II 2D Ex tb IIIC T80°C Db |
| Directive compliance | Directive 94/9/EC, EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-31:2014 |
Other information
| causality | Detailed information |
|---|---|
| functional safety | MTTFd: 30 a, Time to Mission (TM): 20 a, Diagnostic Range (DC): 0% |
| replacement (parts) | Measuring wheel with 12 mm shaft diameter |
this paper was written by Encoder Home Posted in. Encoder HomePlease maintain the integrity of the article and include the source of the article (Encoder House) and a link to this page.
Original link: https://www.bmq123.com/en/1182.html
Original link: https://www.bmq123.com/en/1182.html
