FGH6KK-2000G-90G-NG-S-J/50P: Explanation of Customized Alternatives for Large Heavy Duty Encoders

By the time you read this, we will have made an alternative solution for the FGH6KK-2000G-90G-NG-S-J/50P model.

This is HUBNER's introduction of theHeavy Duty Encodersmodel, mostly used in the steel and metallurgy industry. This is also one of the most difficult encoder models to procure, which is true in our case, because the delivery time takes a long, long time. Generally speaking, purchasing can be done one to two months in advance according to your production. But if it is more than six months, it will delay the production.

In the middle of this month, a steel company commissioned us to develop an alternative product. We have the know-how to develop this product, mainly because the customer's purchasing volume is usually very small, so we did not take the initiative to develop a corresponding product.

Now the opportunity has come for a customer to commission the development of customized production. This will make our development costs much lower and the customer will volunteer to cover the first development costs. This will be the best of both worlds. If there are other customer needs later on, we can just produce them.

This is a large dual output incremental encoder with a hollow shaft size of 50 H7mm with flag pulses that reflect the signal. Of course, other bore sizes can be customized. For example, 40 H7mm, 30 H7mm, etc.

FGH6KK-2000G-90G-NG-S-J/50P, this type of encoder is usually used as main motor encoder. In these two years, Russia, Indonesia and India have inquired about this product, due to the low purchase quantity has not been developed. Now, the replacement of this model is officially put on the daily routine.

To say an internal news, in fact, our proofing products have been in a steel mill for actual testing. Waiting for the end of the test can be delivered to the steel mill customers.

A lot of customized alternative development of encoders can be done, and ultimately it is important to consider the number of units demanded by the market. Like the article introduces this model, the general procurement volume is one or two units. This kind of procurement volume can not do mass production, only small batch customization.

I rushed to write this diary today during my Saturday off, so I hope those who need it will see it.

If you are experiencing sourcing difficulties, you can approach us for a commissioned customization.