The CRD58-4096R4096C2Z01, is a very widely used encoder, at least in our national market. It is found in many older devices.
This is the product model of TWK company, we often receive this type of inquiry. But the quantity is relatively small, this kind of inquiry customers are mostly a metallurgical industry.
I was impressed by the Simak brand of extruders, which are cleanly fitted with this type of encoder, and some are also equipped with pull-wire traction sensors.
We present replacement models that are fully replaceable products. Furthermore, each of our encoders comes with a standardized base. Take a look at the "face value" of our products.
The communication protocol of this encoder is Profibus-DP, the resolution is 40964096, the flange type is ZB36, the mounting size is 58mm, and the connector type is 3PG9.
The encoder model is a conventional 58mm series absolute encoder, which is not too complicated and is of moderate size. We have a complete solution for the replacement of this product, thanks to a commission from a previous customer.
This encoder doesn't have too many requirements in terms of application, as long as you can change the GSD file. However, there are many customers who surprisingly do not know how to change the GSD file, so we would like to make it clear here in advance. We will provide instructions, but must be able to operate. After all, many purchasing friends come from all over the world, and it is troublesome to return and exchange products. Everyone must understand this paragraph.
We have one side of the electronic version of the manual, but it is in Chinese. This is good news for those who are not familiar with the operation, at least you can refer to it. For those who can't read Chinese, you can simply translate it yourself.
There is not much to explain about this product, there is a related need and contact will be fine. If people use WeChat, try to just use this contact, it's a bit easier.
Or, email me as well.
原文链接：https://www.bmq123.com/en/183.html
