AVS14N-05MK2A0GN-0012, Pepperl+Fuchs Explosion-Proof Singleturn Absolute Encoder Discontinued Model, AVS14N-05MK2A0BN-0012

This is a Pepperl+Fuchs single-turn absolute encoder with SSI communication signals.The AVS14N series encoder is an explosion-proof encoder with a diameter of 116 mm.Unfortunately, the original model has been discontinued, and is now mainly in demand in the spare parts market. In fact, we have already introduced this series of encoders in our previous article, let's take a look at the previous article:AVM14N-05MK2A0GN-1212, Pepperl+Fuchs explosion-proof absolute encoder discontinued customized replacement AVM14N-05MK2A0BN-1212The

The previous article presented a multi-turn absolute encoder, which is the same size as the one presented today, only the resolution is different. Today, we are going to introduce a customized alternative accomplished through a non-standard form. Let's come down and reintroduce the complete parameters of this encoder.

First of all, the encoder's Frank size is 116mm, the shaft diameter is 12mm, the signal is SSI communication, the resolution is 4096, and the tail outlet: 2 meter cable. These data basically constitute the parameters of the whole encoder. We can make non-standard customization through these parameters. Let's take a look at some of the introduction of the customization program.

Introduction to Customized Alternatives

We have a complete replacement solution for the entire encoder. This is a replacement that we helped an oil company develop last year, which was customized exactly to the original encoder parameters. The encoder's communication is SSI, and we have a complete electrical solution. Then we designed a matching mechanical solution to make the perfect replacement.

Let's take a look at a physical picture of the replacement product:

Above, is a picture of our custom replacement in action, which is basically a replica of the original encoder.

This encoder we have written in the title two models, in fact there is a slight difference, that is the code value of the two encoders are different. The first encoder has a Gray code value and the second one has a binary code value. All other parameters are the same, just this difference. The feedback in the actual application is also very good. After all, it is a customized non-standard product, in the material application is also more costly.

Customization process and delivery time

As this type of encoder product is realized by non-standard form, we are not in stock and our usual purchasing volume is very small. Therefore, customizing this product requires a lead time for production. This lead time follows our production schedule. Therefore it needs to be confirmed according to the order scheduling situation at that time. This is something you must pay attention to, and communicate with us about the lead time after confirming with us.

For particularly urgent orders, we also provide as much help as possible according to the actual situation. If conditions permit, we will help you realize "rush order delivery" by means of expedited production. However, this situation is relatively rare. Because our orders are usually shot very tightly, these non-standard orders are scattered too much.

Anyway, it's good for everyone to communicate according to the actual situation. Try not to do rush orders, sometimes it is difficult to be able to meet the rush order production. Most of the non-standard orders sent to us are quite urgent. In this case, we can only prioritize the order.

At the end of the article there is my contact information, the specifics have been communicated.