This is a Pepperl+Fuchs Absolute Encoder, communication signal is "SSI", model number: ASM58N-F2AK1R0BN-1213, this encoder has been inquired about customized substitution many times. It so happens that today there is another customer who needs to make a customized replacement model. So, let's make an explanation around the parameters of the customized product.
As an SSI encoder, this model is not particularly complex. Among the encoders that we have done, SSI encoders are still considered to be some of the simpler products. After all, they are standard products. At the same time, the customized alternative encoders are produced according to 1:1 parameters and can be installed directly without additional operations.
Introduction to Customized Alternatives
Let's take a look at the encoder parameters.
This is a 58mm OD blind hole encoder, the communication signal is "SSI", the resolution is: 4096*8192, the most important parameter is the encoder's hole diameter, the size of 12*30mm, which is a set of important data. Generally, the depth of the blind hole encoder is 20mm, and the depth of the blind hole of this encoder is 30mm, which is "special". All other parameters are standard.
With this data, we match customized alternatives. Let's look at the picture first:
The picture above is a physical picture of the alternative. For the ASM58N-F2AK1R0BN-1213 model, it is a cable connector. The cable that the socket portion of the picture above was changed to fit perfectly. Since I didn't take a picture of it, I'll replace it with this picture of the replacement.
We have a complete electrical program and a complete program for the mechanical part. In this way, we can perfectly replace the original encoder. It is a direct parallel replacement, installed and ready to use.
Customization cycle and precautions
Generally speaking, the customization lead time for this type of standard encoder is 7 working days. This lead time is also sufficient for this encoder. It is only occasionally extended. Since this blind flange is not commonly used, we don't keep much in stock. If it happens to run out, we will need to re-produce the blind hole flange. This may extend the lead time a bit.
Other than that, there wasn't too much to notice.
The application part, as it is the encoder of SSI communication signal, is no other settings are needed. It can be used as a direct replacement.
Above, you can find the description for the encoder model ASM58N-F2AK1R0BN-1213. Recently, the number of inquiries about Pepperl+Fuchs encoders has been high. There are also some inquiries from other countries, and Pepperl+Fuchs encoder models account for more of them. Probably because of the impact caused by the U.S. tariff policy, many application companies are looking for a second solution.
All in all, the customized replacement solution for this one encoder is a direct 1:1 replacement. If you need it, you can contact me.
原文链接：https://www.bmq123.com/en/851.html
