GM400.Z41, a customized alternative solution to Baumer's yaw encoder, a field rescue!

Today's write-up is about aYaw EncoderThis is a Baumer encoder: GM400.Z41. I guess it's a very old model, and the customer feedback is that it's very difficult to source spare parts. I guess the model was upgraded, or there is a similar model, this model is weakened or really discontinued.

The customer was in a hurry and the site was down. There was no way to buy a couple of used ones online to use and find spare parts in the free time. After a few days to find a solution, decided to entrust us to do customized replacement. In fact, this encoder parameters are not complicated, we first look at the overall product parameters.

Pictures of the originals first:

This is an SSI communication plus incremental signal encoder, 58mm OD, 10mm shaft clamping flange. The resolution is 1213, the code value is Gray code, the pulse count is 2048ppr. The outgoing line is M23-12 side exit. That's all the parameters.

Let's go back to the customized alternatives.

Introduction to Customized Alternatives

SSI communication plus incremental signaling for the encoder, which we've been doing again.

For this GM400.Z41 model replacement, it's also relatively smooth and basically a flat replacement. The only thing is that the original incomplete wiring definition has to be installed at the time of production, so that it will come out exactly the same. Our conventional products use our own "wiring definitions", so when replacing them, just refer to the original product wiring definitions. This makes it easier to use and does not require additional settings.

Above, is an actual picture of our customized alternatives. Except for the color difference, the others are the same. During the actual customization process, some customers specify "silver" housing, which we also have. According to your preference can provide silver shell encoder. In general, or according to the color in the picture.

This customer's customization is also the case of expediting, or the quantity is relatively small, if more cases really can not be expedited out. Usually, we have a bunch of these customized bulk orders here, everyone is in a hurry, who do you say first? Can only follow the order one by one. Customized single is not a profit product, sometimes we have to take into account our bulk standard products.

Fortunately, this product has all the materials, expedited to do the next day to send express delivery to the customer.

This encoder, GM400.Z41, has two products and an earlier one with a blue housing. Just the color is different, the products are the same. Last time a customer said his was blue, the color issue does not need to be stated it is the same.

This SSI absolute plus incremental signal encoder is introduced here, you need help in this area can contact the phone number below WeChat. However, try not to engage in rush orders. Usually this kind of order will be shipped in about 7 working days.