This is an older model of the lika absolute encoder, model number AM5813/4096PB-10-PG. It is called older because the serial number for this parameter is no longer available. Or upgrade or discontinued, in any case, there is no longer this sequence. Then, it is much more difficult for customers to purchase.
Wednesday's this customer is a supplier, to a factory supply, on the need to the old procurement problems, really can not find the prototype number of products. After communication with the party using customized way to solve the application. The encoder itself is not complex parameters, mainly "difficult" in the model.
Let's take a look at the parameters of this encoder. First of all, this is an absolute encoder, the communication protocol is profibus, the mounting size is 10mm shaft diameter synchronous flange, the outer diameter of 58mm, and then there is the resolution, 4096 * 8192. these parameters constitute the whole encoder.
Below, we are looking at the introduction of customized alternative solutions.
Introduction to Customized Alternatives
In terms of product parameters, we only have complete solutions. The encoder of this parameter is a regular standard product for us, the mounting dimensions and application parameters are one to one, only the color of the housing is different.
Let's take a look at the product appearance picture:
The above picture is the physical color appearance of our products, the overall view is still more durable, the finished product is more beautiful than the picture. Since it is exactly the same parameter encoder, there is not much to write out.
Just one more thing to keep in mind about the application is the GSD application. It is well known that the application of profibus encoders requires a GSD file. Our alternative encoders also provide the corresponding GSD files, which need to be sent to the application engineers to use. There is a "problem" in the middle, in the actual application of a number of terminal engineers to solve the problem of use, most can not be applied to get stuck here.
Therefore, the first thing you need to confirm when communicating with the customer is the "GSD file replacement application". If this can be solved, there is no problem. If you get stuck on the GSD file, then there is no need to communicate further. Especially, traders should be clear about this point. There have been cases where everything was agreed upon, but the engineers couldn't use it, which was embarrassing.
In fact, Profibus-dp is a communication signal that is about to be eliminated. However, in the domestic application, many terminals are pre-following the equipment over the encoder, in fact, many engineers have not personally operated the entire installation process. This leads to the replacement of spare parts later can only focus on the original encoder replacement, even if the discontinued encoder can only look around for spare parts or second-hand products.
Encoders in general, there are many different replacement programs and products, most of which are stuck on replacing the "GSD file".
If, however, you need help with this encoder application, contact me on the condition that you can solve the GSD file application. We provide the appropriate GSD file.
原文链接：https://www.bmq123.com/en/692.html
