CE65M 110-02807, TR Absolute Encoder (Profibus-DP communication signal)

This note focuses on a model number of a TR absolute encoder as follows: CE65M 110-02807. this is an encoder with Profibus-DP communication signals. It is well known that procurement of TR encoders is also difficult. It is especially difficult for spare parts that are needed in small quantities. This model is often inquired about, and last night a customer called to ask about it.

As this encoder application is relatively conventional, has not been written notes before. Always feel as a conventional model is not necessary to write out, now it seems that there are still many customers have a lot of places do not understand. Today, the loss is not comprehensively write a separate introduction.

We mainly customize replacement models with the same parameters according to the original encoder specifications. This is used to solve application problems and, incidentally, procurement difficulties.

Customized alternative instructions

Let's take a look at the encoder's parameters, this is a CE65M series encoder. This means that the outside diameter is 65mm, which is not really significant, as many of the encoders from Deere are 65mm.

This encoder is a synchronous flange (ZB50) with a shaft diameter of 12 mm, a resolution of 4096*4096 and a communication interface of Profibus-DP, which basically constitute the main parameters of the encoder application. For the above parameters, we do have a complete solution. Let's take a look at the appearance picture of the customized way.

As you can see in the picture above, it is a physical picture of our custom replacement encoder. We used a 58mm OD solution. Although the original encoder has a 65mm housing, it is an application where a 58mm mounting size is sufficient. Other electrical solutions are one of our main products with complete replacement solutions.

We can customize the product with 1:1 application parameters. In this way, we have solved the problem of customized replacement products for 110-02807.

caveat

For encoders with Profibus-DP communication signals, there is one thing to be aware of: the GSD file. This requires a technician to be able to use and control the encoder via PLC configuration. Although this is a routine operation, there are still many people who do not know how to operate it. Whenever we receive inquiries from customers, we take great pains to confirm this issue.

If, your technician cannot operate this step. Then, there is no way to do alternative work. This is necessary for encoder applications.

Well, that's all there is to this introduction to the TR encoder. Specific details that are not clearly stated, and then separately exchanged.