Today we're featuring an SSI absolute encoder from Henslowe, labeled: 0566793, the actual model number is AC58I1213EK.42SMX. this is a model number that has been released by Henslowe encoders for a number of years now. From the latest manual increment available, it is a model released in 2010.
The customer wants to buy the original encoder, this is not available to us at the moment. We can provide customized solutions to replace this product application. The customer is a little hesitant or hope to purchase the original, I can only suggest that he look again, can not find the original and then consider customized alternative.
Let's just go over the customization alternatives first.
Introduction to Customized Alternatives
Let's take a look at the parameters of the original encoder, which is an SSI communication plus incremental signal encoder. The resolution is 4096*8192, the incremental signal pulse is 512. 58mm outer diameter, 10mm shaft diameter clamping flange. This is all the parameters.
The replacement encoder for this product is a complete solution, except that our standard incremental signal pulse is 2048. which is a bit more precise than that. And 512 pulses are rare now. Let's take a look at the actual picture.
The picture above, is the actual picture of our customized encoder. This encoder is more widely used in the wind power field, especially after many pitch encoders are discontinued, it is especially popular in the market.
Generally speaking, this kind of SSI communication + incremental encoder is used as pitch encoder in wind power field. Now most of these encoders in the wind power field is to take the customized alternative, mainly a number of brands of early models are discontinued, involving Baumer, Kübler, Henslow, Sick and other brands. These years these few brands of pitch encoder alternative to do more.
Another, SSI absolute encoder application is relatively simple, do not need too much setup, alternative replacement is also relatively easy to get started. It is a kind of communication signal encoder that is replaced the most in the wind power field, and the quantity is larger in comparison.
When communicating about custom alternatives, try to confirm with a photo of the nameplate. Some new purchases are sometimes sent with the wrong model number. It is more accurate to use the nameplate.
Above, it is about the customized alternative introduction of encoder model 0566793. If there is a need in this area you can contact us, there is contact information at the bottom of the end of the article.
原文链接：https://www.bmq123.com/en/721.html
