Z 136.310, Introduction to a pull-wire displacement transducer with domestic program (Z 136.305/15)

Today we are going to introduce aCable Displacement Sensors, is the model number of the title: Z 136.310. it is a very old model, and the manual I have seen is a very old French version of the material.

Cable Displacement SensorsThe Z 136.310 model is a 10 meter range, and the Z 136.305 tests a 5 meter range. While the Z 136.305 tests a 5 meter range. The maximum range of this product series Z136 is 40 meters and the minimum range is 3 meters.

The two models described in the title are both encoders that connect to a 58mm synchronizing flange. This is important to note because it has a 3 meter range pull box with a shaft out. This should be distinguished, otherwise it is easy to confuse when configuring the encoder.

This product has been discontinued for N long time, the company that owns it may not even be around anymore, and the domain name of the official website is on sale. It can only be replaced by the domestic way.

Domestic alternative solutions

national programsCable Displacement Sensors, is a universal model. The size and appearance of this cable pulling box is consistent with many imported brands. It is also the mainstream cable pulling mechanism today.

You can see a picture of the real thing, and we'll just pull the wire box part directly.

We have recently upgraded this wire displacement sensor to provide a more demanding solution for harsh operating conditions. For example, for marine applications, we can change the aluminum alloy material to stainless steel. Some large dredgers have had this requirement, mainly to resist the erosion of sea water. Now, these solutions can be realized.

The two models of pull-wire sensors in the article are purely pull-wire box parts, which in practical applications also need to be equipped with encoders. Now we give the solution for the pull-wire box, if the encoder solution is also needed, then contact separately. Just take a picture of the encoder's nameplate or the new application parameters, and we can determine the solution according to the parameters.

Above, is today's presentation.

For non-conventional encoder products, or discontinued products, if there is still an urgent need for spare parts, you can contact us. We'll confirm whether we can offer a customized solution.