Today, presenting a TR DeereCable Displacement SensorsThe company's main goal is to replace the original encoder with a localized solution. This is a steel mill customers, need to find a localization program to replace the original encoder. While the program has been done to heat, write a note to record, the next time someone consulting will be convenient.
The difference between CEW65M-10084 and CEW65M-10083 is that the stroke of the pulling box is different.CEW65M-10084 is a 10 meter pulling cable, CEW65M-10083 is a 5 meter pulling cable, all other parameters are the same.
From the product description, thisCable Displacement SensorsThis is mainly achieved by means of Profibus-DP encoders, a category that has been more frequently replaced by Deere products in the last few years. This is mainly due to the Profibus-DP communication protocol, which is about to be phased out of the market. Newer products are basically using Ethernet encoders with faster transmission speeds, and only some older devices are still using Profibus encoders.
As a result, Profibus encoders are mainly purchased on the spare parts market. The production planning of the original product is then less active. The alternatives we have introduced are localization solutions, which can replace the original product 1:1. Our focus is on "localization", where all components are domestically produced, so that the supply chain can be optimized.
Domestic Profibus encoders are also very popular in neighboring countries. In particular, the number of Russian purchases is still relatively high, the Middle East, Brazil, Indonesia, the demand for Chinese encoders are good.
Since we made the localization encoder, can take out and sell to the world quality is no problem. Our products have been used in the domestic special industry important positions, as well as some steel mills, aluminum plants. So don't worry about the quality problem. Need to be concerned about is that the technology of the application enterprise can use Profibus-DP encoder.
Although, Profibus encoders are about to be phased out, there are still many factories in China that will not use Profibus encoders. So, the biggest problem is to solve the application problem. We will provide the GSD file of the encoder. If you are a trader friend, you must communicate whether you will use it first. This will save a lot of time, if you will not use it, you do not need to follow up in detail.
both casesCable Displacement Sensors, that's all for today, contact the number below if you need to.
Original link: https://www.bmq123.com/en/354.html
