Today we received an inquiry from a customer looking for a replacement for encoder 10-11631-A-4000. This encoder model has been officially discontinued and now a replacement spare part needs to be purchased, which brings us to the opening inquiry question.
with regards toincremental encoderIn terms of doing customized replacement is relatively easy, as long as the solution to the problem of the installation size of most of the customization can be achieved. Let's take a look at the parameters of this encoder.
10-11631-A-4000incremental encoderParameters: Pulse 4000ppr, tightening flange, solid shaft 10mm, 36mm cam, OD 58mm, tail out line 2m. with these parameters, we can give customized replacement program.
Following the original parameters, let's make an identical parameterizedincremental encoder.. The internal parameters are the same, so let's compare the exteriors.
Picture of the original on the left and the customized replacement on the right.
By this point, we have achieved the customization of the 10-11631-A-4000 encoder product. In the case of other pulse products, such as the 10-11631-A-5000, we only need to deal with the internal code disk parameters. The rest of the structure remains unchanged.
For the 58mm incremental encoder, we have an in-house mechanical development program, which only requires adjusting the parameters according to the dimensions and the code plate to achieve a customized replacement.
Since this model is officially labeled as discontinued, I'm posting a note today to make a note of it. Also hope that people who need it can see this piece of information and can find the right solution even though.
That's all for today, so if you have any other needs or hard-to-solve problems, you can contact me.
Original link: https://www.bmq123.com/en/188.html
