IVM78E-011KRR05I-0413 Pepperl+Fuchs PROFIBUS multi-turn absolute rotary encoder
Pepperl+Fuchs PROFIBUS multi-turn absolute rotary encoders
IVM78E
4-position multi-turn/ATEX approved/ICEx approved/flameproof housing
Removable Connection Cap / Analog Output / Surge and Reverse Polarity Protection
We offer encoder replacement solutions in the form of off-standard replacements with all 1:1 application parameters, perfect replacements for prototype encoders, solving procurement and other problems. The picture shows the replacement solution.
Technical Data of the Multiturn Absolute Rotary Encoder IVM78E
General specifications
| causality | Detailed information |
|---|---|
| Detection type | magnetic sampling |
| Equipment type | Multiturn absolute rotary encoders |
| Measurement range | Minimum 0 ... 22.5 °, max. 16 x 360 ° |
| decision (of a congress) | 16 bits (12 bits/revolution) |
| Functional Safety (MTTFd) | 470 a, L10: 7.7 E+9 at 3000 rpm |
| Operating voltage (U_B) | 10 ... 30 VDC |
| current consumption | Typical 40 mA |
| Input 1 (Unit 1) | Signal voltage high: 15 ... 30 V DC, signal duration min. 1 sec. |
| Input 2 (Group 2) | Signal voltage high: 15 ... 30 V DC, signal duration min. 1 sec. |
| analog output | 1 analog output, current, linearity error ≤ 0.15 % |
| load resistance | max. 500 Ω (max. at operating voltage 15 V) |
Standards compliance and testing
| causality | Detailed information |
|---|---|
| Protection level | DIN EN 60529, IP66 |
| Climate testing | DIN EN 60068-2-78, no moisture condensation |
| radiated interference | en 61000-6-4:2007/a1:2011 |
| noise immunity | EN 61000-6-2:2005 |
| impact resistance | DIN EN 60068-2-27, 100 g, 6 ms |
| seismic defenses | DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz |
Approvals and certificates
| causality | Detailed information |
|---|---|
| IECEx Certification | Equipment protection class Gb, IECEx ITS 15.0061X |
| ATEX Certification | Equipment protection class Gb, ITS 15 ATEX 18372X |
Mechanical specifications
| causality | Detailed information |
|---|---|
| makings | Housing anodized aluminum or stainless steel 1.4404/AISI 316L, Flange: anodized aluminum or stainless steel 1.4404/AISI 316L, Shaft: stainless steel 1.4404/AISI 316L |
| mass (in physics) | approx. 2600 g (combination 1), approx. 3900 g (combination 2) |
| rotation speed | Max. 3000 min-¹ |
| moment of inertia (mechanics) | 180 g/m2 |
| Starting torque | ≤ 4 N-cm |
| shaft load | Axial: 60 N, radial 80 N |
Other information
| causality | Detailed information |
|---|---|
| program | Measuring range can be scaled via signal inputs "Setting 1" and "Setting 2" |
| Reset to default | Connect the two signal inputs ("Setup 1" and "Setup 2") to a high potential source (12 VDC < high potential < +U_B) 1 sec. |
| Analog Output Properties | Outputs the current angular position as analog current or voltage, programmable from 22.5° to 16 x 360°. |
this paper was written by Encoder Home Posted in. Encoder HomePlease maintain the integrity of the article and include the source of the article (Encoder House) and a link to this page.
原文链接：https://www.bmq123.com/en/1001.html
原文链接：https://www.bmq123.com/en/1001.html
